News

OXVA V Prime 2 Guide UK (2026)

The V Prime 2 is OXVA's latest refillable pod kit, and it's a big step up from the original V Prime. If you've used an OXVA kit before, most of it will feel familiar. The difference is the power. It packs a 3400mAh battery, goes up to 60W and runs OXVA's new Dual Mesh pods, so the same device can give you a tight, flavourful draw or a much airier one.

This guide covers setting it up, choosing pods, and picking the e-liquids and nic salts that suit it.

The V Prime 2 at a Glance

• 3400mAh built-in battery with 3A USB-C fast charging
• Adjustable output up to 60W
• V Prime Dual Mesh pods, with a single coil and a dual coil mode
• Works with original V Prime pods too, in Eco Mode
• Sliding airflow control for RDTL and DTL vaping
• Auto-draw and button firing
• 0.98 inch colour screen
• About 113 x 41 x 28mm

Setting It Up

1. Give it a charge first. A 3A USB-C charger will top it up fastest.
2. Fill the pod with the e-liquid you plan to use and push it into the device. UK versions of the pods hold 2ml, the legal limit.
3. Let a new pod soak for about five minutes before the first puff. Dry cotton is the most common cause of a burnt taste on day one.
4. Start low. Set the wattage near the bottom of the range shown for your pod, take a few puffs, and raise it a step at a time until it tastes right.
5. Set the airflow. Slide it closed for a tighter draw, or open it up for a looser lung draw.

You can vape by simply drawing on it or by pressing the button, whichever you prefer.

Pods and Coil Modes

The V Prime 2 is built around OXVA's V Prime Dual Mesh pods. With one of these fitted, press the button four times to switch between the two modes.

• Single coil mode uses one mesh. It's easier on the battery and on e-liquid, so it suits all-day vaping.
• Dual coil mode fires both meshes for more flavour and more vapour.

If you already have original V Prime pods, they'll work in the V Prime 2, but only in Eco Mode. That makes it an easy upgrade if you've got a few spare pods left over.

Change the pod when the flavour fades or starts to taste burnt.

Which E-Liquids and Nic Salts Suit It

Because the V Prime 2 covers such a wide power range, it can take most types of e-liquid. The trick is to match the liquid to the way you vape.

For a tighter RDTL draw, nic salts are a good fit. Keep the airflow fairly closed, use single coil mode or a lower wattage, and choose 10mg or 20mg depending on how strong you like it (20mg is the UK maximum). Nic salts stay smooth at those strengths, which is why they're so popular in pod kits. Choppa Vapes stocks a wide range of nic salts, including multi-buy deals, so it's easy to try a few flavours.

For a looser DTL vape at higher power, switch to a 50/50 or high VG e-liquid at a lower strength such as 3mg or 6mg. More power turns more liquid into vapour with every puff, so a lower nicotine strength usually feels about right. Use dual coil mode and open the airflow up.

Whichever you choose, stay inside the wattage range for the pod you're using.

Looking After It

• Keep the contacts on the pod and in the device clean and dry. A quick wipe with a tissue now and then stops most connection problems.
• Don't let the pod run dry, because vaping on an empty pod burns the coil.
• If liquid gets into the airflow, take the pod out, wipe it and refit it. Overfilling is the usual cause.

Who It's For

The V Prime 2 suits vapers who want more battery and more control than a basic pod kit, without moving up to a bulky mod. It's a natural upgrade for anyone on the original V Prime, and the long battery life makes it a good pick for heavier users.

You can find the OXVA V Prime 2 Pod Kit at Choppa Vapes, along with pods and nic salts to go with it.