Apocalyptic coils (for rebuildables) All Ni80 and Ni90 Coils
• Fused Claptons 0.15 or New 0.10
• Tri Cores 0.11
• Ni90 0.1 Fused Claptons
• Series coils 0.35, 0.39, 0.45
• Juggernauts 0.1
• Aliens 0.10 and 012
• Dual Core Aliens 0.10 or 0.09
• 0.34 Claptons (small so for tanks 25mm and below)
• Fraliens 0.1 ohms
• Framed Staples 0.09 or 0.11 (0.11 Ni90 inner core so better for mechs as faster ramp up)
A fused Clapton is a thinner gauge wire wrapped around two or more thicker gauge cores. The multiple cores give fused Claptons a faster ramp up time and arguably better flavor than non-fused Claptons, due to the increase in surface area.
The term “fused” refers to the process of wrapping multiple wires together with thinner outer wire. A fused Clapton is essentially a parallel build that’s been “Claptonized.” Most multi-strand coils like aliens are also fused together in a similar fashion.
The textured outer wrap is achieved by building a regular Clapton, then carefully removing the inner core. Then, it’s wrapped around a multi-strand core containing the same gauge as the original core that was removed.
Alien claptons come in low resistances for sub ohm vaping Aliens are thick and require a deck with very large post holes or a clamp-style deck.They are made with a de-cored clapton wrapped around three or more parallel cores.Aliens have a slower ramp-up time than fused Claptons of the same resistance. They are hard to perfect and require mastery of making Claptons and fused Claptons.
What is a framed staple coil?
The framed staple is a cross between the staple and the fused clapton. It consists of stacked ribbon wire framed by round wire, fused together, or “Claptonized” by thinner round wire. The different cores create spaces within the wire which gives it better flavor than a standard staple and actually decrease ramp-up time.
The stacked ribbon core is “framed” in between two round cores, which creates additional texture and gaps inside the coil, which also makes it a bit easier to wrap.
Framed staple coils are low in resistances for direct lung vaping. Framed staple coils very thick and require large post holes or a clamp-style deckThey contain a thin outer strand wrapped around a stack of ribbon wire sandwiched between two round cores. Framed staple coils have a quicker ramp up time than regular staple coils of the same resistance. They are not easy to make but possible once you master the fused Clapton and the staple coil
The Framed Staple can be added too to create a Fralien, which is the same base as the Framed Staple however a Alien Clapton method is used to give the alien effect.